5 Best MERV 13 Filters for Santa Fe Dehumidifiers (November 2026)

The best Santa Fe MERV 13 dehumidifier filters include the CPLIKE MERV 13 Dehumidifier Filter 14 x for broad model compatibility, the AprilAire 5881 Washable MERV 8 Dehumidifier Filter for washable AprilAire units, and the Santa Fe Certified MERV 13 Dehumidifier Filter for Santa Fe brand replacement.

On this page (7 sections)

1. How we chose Santa Fe MERV 13 filters
2. Compare these Santa Fe dehumidifier filters
3. Best Santa Fe MERV 13 filters and alternatives
4. How do you match a replacement filter to your Santa Fe model?
5. Should you choose MERV 13 or MERV 8?
6. How often should you replace or clean the filter?
7. Which Santa Fe MERV 13 filter should you choose?

The best Santa Fe dehumidifier filters with MERV 13 are the CPLIKE and Santa Fe Certified options, both sized 14 x 17.5 x 1.75 in. Confirm your exact model and the filter dimensions before ordering, since compatibility varies by unit.

MERV 13 is the key requirement in this comparison, but fit comes first. A filter that is too thick, narrow or shallow may not fit the slot correctly, so check your current filter and your model’s manual.

For the broadest stated model compatibility, start with CPLIKE. For a Santa Fe-branded MERV 13 replacement in a six-pack, consider the Santa Fe Certified filter.

The other options here are MERV 8 or are intended for AprilAire units.

Our picks at a glance

1. 1
   Best for broad model compatibility

   CPLIKE MERV 13 Dehumidifier Filter 14 x

   9.7/10 our score

   See it on Amazon
2. 2
   Best for washable AprilAire units

   AprilAire 5881 Washable MERV 8 Dehumidifier Filter

   9.5/10 our score

   See it on Amazon
3. 3
   Best for Santa Fe brand replacement

   Santa Fe Certified MERV 13 Dehumidifier Filter

   9.4/10 our score

   See it on Amazon

4. 4

   QUNYI Filter for Santa Fe Force Dehumidifier

   Best for Force owners needing MERV 8
   Check it
5. 5

   Therma-Stor Santa Fe MERV 8 Dehumidifier Filter

   Best for a single MERV 8 replacement
   Check it

How we chose Santa Fe MERV 13 filters

We compared the stated MERV rating, dimensions, named compatible models and pack size. We also included a few MERV 8 alternatives to help you see when a different filter type or model-specific fit may matter.

Our scores weigh those features against the search for a Santa Fe MERV 13 replacement. The MERV 8 picks are alternatives, not MERV 13 substitutes when your unit or filtration preference calls for MERV 13.

Compare these Santa Fe dehumidifier filters

The two MERV 13 choices both state a 14 x 17.5 x 1.75 in size, while the MERV 8 filters have different model fit or care details. For crawl space systems, compare replacement filters for crawl space dehumidifiers.

Use this table as a shortlist, then confirm your unit’s requirements.

Best Santa Fe MERV 13 filters and alternatives

CPLIKE leads for its stated compatibility across several Santa Fe models and four-filter pack. The other picks serve owners seeking a Santa Fe-branded filter, a washable filter for a different brand, or a MERV 8 replacement for specific models.

1

CPLIKE MERV 13 Dehumidifier Filter 14 x: Best for broad model compatibility

9.7/10Our score

• MERV 13
• 14 x 17.5 x 1.75 in
• 4 filters per pack
• Compatible with several Santa Fe models

A four-pack with a stated 14 x 17.5 x 1.75 in size and compatibility across several Santa Fe models. Confirm your model and filter dimensions before ordering.

See it on Amazon

Pros

• Four filters in one pack
• MERV 13 rating
• Names several compatible Santa Fe models

Cons

• Not a fit for every Santa Fe unit

The CPLIKE filter is the strongest match for owners seeking a MERV 13 filter in the 14 x 17.5 x 1.75 in format. Its compatibility list names Advance90, Advance100, Advance120, Ultra98H, Ultra120H, Advance2 and Force models.

It comes as a four-pack, which gives you replacements on hand for future maintenance. CPLIKE describes a pleated structure with dual wire backing and recommends replacement every six months.

Check the model name and dimensions before ordering. Similar Santa Fe names do not guarantee the same filter slot size, and the product’s stated fit does not cover every dehumidifier in the brand’s range.

Choose CPLIKE if your model appears in its compatibility list and you want MERV 13. If your unit takes another size, use the model manual to identify the right replacement.

2

AprilAire 5881 Washable MERV 8 Dehumidifier Filter: Best for washable AprilAire units

9.5/10Our score

• MERV 8
• Washable with water and mild detergent
• 12 x 13.5 x 1 in nominal size
• For AprilAire E080 and E100

This washable filter is for AprilAire E080 and E100 dehumidifiers and 8192A ventilators. It is included as an alternative for owners comparing filter care, not as a Santa Fe replacement.

See it on Amazon

Pros

• Can be washed with water and mild detergent
• Reversible installation
• Named fit for AprilAire models

Cons

• MERV 8, not MERV 13
• Not listed as a Santa Fe compatible filter

AprilAire’s 5881 is the washable option in this group, but it is not a Santa Fe replacement. It is intended for AprilAire E080 and E100 dehumidifiers or the 8192A ventilator.

The filter has a nominal size of 12 x 13.5 x 1 in and a MERV 8 rating. AprilAire says it can be washed with water and mild detergent, and it can be installed facing either direction when the length and width align with the rails.

It’s useful here as a point of comparison if you are weighing washable care against disposable Santa Fe filters. Don’t choose it for a Santa Fe unit based on the MERV rating alone.

For the basics on why these appliances use filters, read Do Dehumidifiers Need Filters?.

3

Santa Fe Certified MERV 13 Dehumidifier Filter: Best for Santa Fe brand replacement

9.4/10Our score

• MERV 13
• 14 x 17.5 x 1.75 in title size
• 6 filters per pack
• Names several compatible Santa Fe models

Santa Fe’s MERV 13 replacement is offered in a six-pack and names several compatible models, including Advance2 and Force. Check the exact dimensions and model fit.

See it on Amazon

Pros

• Santa Fe brand replacement
• Six filters per pack
• Names multiple compatible models

Cons

• Compatibility still depends on the exact unit

Santa Fe’s certified replacement is the brand-name MERV 13 choice. It names Advance2, Force, Advance90, Advance120, Advance100, Ultra98H and Ultra120H compatibility, and comes in a six-pack.

The stated size is 14 x 17.5 x 1.75 in. That matches the size used by the CPLIKE option, so your model and filter slot are the deciding details between these two picks.

The manufacturer describes it as a pleated filter in a box frame that captures particles as small as 0.3 microns. That particle claim is specific to this filter and should not be read as a promise about whole-room air quality.

Choose this one if you want a Santa Fe-branded MERV 13 filter and your unit is named as compatible. See our best Santa Fe dehumidifier filters guide for additional replacement options.

4

QUNYI Filter for Santa Fe Force Dehumidifier: Best for Force owners needing MERV 8

9.3/10Our score

• MERV 8
• 14 x 17.5 x 1.75 in
• 4 filters per pack
• Compatible with Force and Advance 2

This four-pack is a MERV 8 filter for Santa Fe Force and Advance 2 units. Its stated size matches the common 14 x 17.5 x 1.75 in format.

See it on Amazon

Pros

• Four filters per pack
• Names Force and Advance 2 compatibility
• Can generally be vacuumed several times

Cons

• MERV 8, not MERV 13

QUNYI is a MERV 8 option for the Santa Fe Force and Advance 2. Its 14 x 17.5 x 1.75 in dimensions match the common format used by the MERV 13 picks, but the lower rating makes it a different choice.

The filter comes in a four-pack. Its product details say the pleated fabric can generally be vacuumed several times before replacement, and that running the unit with a dirty filter can reduce capacity and efficiency.

Choose it if your model calls for MERV 8 and you want a multi-pack. If you specifically want MERV 13, compare the first and third picks instead.

5

Therma-Stor Santa Fe MERV 8 Dehumidifier Filter: Best for a single MERV 8 replacement

9.1/10Our score

• MERV 8
• 14 x 17 x 2 in
• For Santa Fe Advance2 and Force

A single MERV 8 replacement for Santa Fe Advance2 and Force. Its stated 14 x 17 x 2 in dimensions differ from the 14 x 17.5 x 1.75 in options, so compare with your old filter.

See it on Amazon

Pros

• Names Advance2 and Force compatibility
• Single filter purchase
• MERV 8 rating is stated

Cons

• MERV 8, not MERV 13
• Dimensions differ from the 14 x 17.5 x 1.75 in format

Therma-Stor’s MERV 8 filter names the Advance2 and Force as compatible models. It is a single replacement with stated dimensions of 14 x 17 x 2 in.

Those measurements differ from the 14 x 17.5 x 1.75 in filters above. Measure the old filter and check your manual carefully before buying, even if your unit is a Force or Advance2.

This option suits an owner whose unit requires this MERV 8 format and who wants one replacement. It is not a MERV 13 pick, and its dimensions should not be treated as interchangeable with the other options.

How do you match a replacement filter to your Santa Fe model?

Match the model number and filter dimensions before comparing brand or pack size. For hOmeLabs units, compare replacement filters for hOmeLabs dehumidifiers.

Start with the label on your dehumidifier, then check the manual and measure the old filter’s length, width and thickness.

The two MERV 13 options in this guide state 14 x 17.5 x 1.75 in dimensions. The Therma-Stor MERV 8 filter states 14 x 17 x 2 in, a meaningful difference even though it also names Force and Advance2.

If your manual specifies a particular filter part number or rating, follow that guidance. A filter’s MERV number alone cannot confirm that it will fit or suit your unit.

Should you choose MERV 13 or MERV 8?

Choose the rating specified for your unit and your filtration needs. This roundup includes MERV 13 options for several Santa Fe models, plus MERV 8 filters for owners whose models or preferences call for that rating.

A higher MERV number indicates more effective filtration on the MERV scale, but it does not guarantee compatibility. Keep the filter dimensions and your dehumidifier’s requirements in view when you compare ratings.

How often should you replace or clean the filter?

Check your filter on the schedule in your manual, and inspect it regularly. The filter information for several options here points to a six-month check or replacement interval, though care instructions differ by filter.

The QUNYI filter can generally be vacuumed several times, while AprilAire’s 5881 is washable but fits AprilAire models. For Santa Fe filter care, use the instructions for the specific filter and unit.

If you’re considering operation without a filter, first read Can You Run a Dehumidifier Without a Filter?.

Which Santa Fe MERV 13 filter should you choose?

Choose CPLIKE if your Santa Fe model appears in its compatibility list and you want a four-pack. Choose the Santa Fe Certified option if you prefer the Santa Fe brand and its named model list fits your unit.

Before you order, compare the old filter’s dimensions with the filter your manual specifies. If your home needs more than one unit, see How Many Dehumidifiers Do You Need?; if washable care matters more than a Santa Fe fit, compare our Best Dehumidifier With Washable Filter guide.

Our top 3 picks at a glance

1. 1
   Best for broad model compatibility

   CPLIKE MERV 13 Dehumidifier Filter 14 x

   9.7/10 our score

   See it on Amazon
2. 2
   Best for washable AprilAire units

   AprilAire 5881 Washable MERV 8 Dehumidifier Filter

   9.5/10 our score

   See it on Amazon
3. 3
   Best for Santa Fe brand replacement

   Santa Fe Certified MERV 13 Dehumidifier Filter

   9.4/10 our score

   See it on Amazon

Frequently asked questions

Which MERV 13 filter fits a Santa Fe dehumidifier?

The CPLIKE and Santa Fe Certified options both state MERV 13 and a 14 x 17.5 x 1.75 in size. Their compatible model lists include several Santa Fe units, but check your model manual and current filter before choosing.

A shared size does not confirm fit across every Santa Fe dehumidifier.

Can I use a MERV 13 filter in a Santa Fe Force?

Both the CPLIKE and Santa Fe Certified MERV 13 options name the Force among compatible models. Confirm that your unit calls for a 14 x 17.5 x 1.75 in filter before buying.

Some Force replacement filters are MERV 8, so match the rating and size your unit requires.

How often should I check a Santa Fe dehumidifier filter?

Check the filter at least every six months, then follow the schedule in your unit’s manual. The QUNYI filter information says the Force and Advance 2 filter should be checked every six months and can generally be vacuumed several times.

Replace a filter when its care instructions or condition call for it.

Can I wash a dehumidifier filter?

Only wash a filter if its instructions say it is washable. The AprilAire 5881 is washable with water and mild detergent, but it is for named AprilAire models and is not a Santa Fe replacement.

For more guidance, see How to Clean a Dehumidifier Filter?.