9 Best Bathroom Fan Timer Switches (November 2026)
The best bathroom fan timer switches include the ENERLITES Countdown Timer Switch for Bathroom Fans for short post-shower runs, the BN-LINK Bathroom Fan Timer Switch for Lights for any time from 2 to 60 minutes, and the Leviton Countdown Timer Switch for bathroom fan for 10 to 60 minute presets.
On this page (10 sections)
- The best bathroom fan timer switches for each setup
- Compare bathroom fan timer switches side by side
- How we compared these timer switches
- Do you need a neutral wire for a timer fan switch?
- How long should a bathroom fan timer run?
- Can a timer switch control a fan and light together?
- Countdown timer or smart timer: which fits a bathroom fan?
- How do timer switches affect humidity and odor?
- How do you install and care for a bathroom fan timer switch?
- Verdict: which bathroom fan timer switch should you buy?
The best bathroom fan timer switch for most bathrooms is the ENERLITES Countdown Timer Switch, because its 1 to 30 minute presets cover post-shower drying without the risk of a fan running for hours. Our score weighs specs, features and buyer feedback against what you're shopping for.
A timer switch does one job well. It keeps the fan running after you leave the room, then shuts it off on time.
That helps clear steam and odor, and it stops you from forgetting the fan.
Start by checking what size bathroom fan you need, since a timer cannot fix an undersized fan. A timer works best when the fan itself moves enough air for the room.
For suspended-ceiling installations, see bathroom exhaust fans for drop ceilings.
Our picks at a glance
-
1
Best for short post-shower runsENERLITES Countdown Timer Switch for Bathroom Fans
9.7/10 our score
See it on Amazon -
2
Best for any time from 2 to 60 minutesBN-LINK Bathroom Fan Timer Switch for Lights
9.6/10 our score
See it on Amazon -
3
Best for 10 to 60 minute presetsLeviton Countdown Timer Switch for bathroom fan
9.5/10 our score
See it on Amazon
- 4
Check itBN-LINK Bathroom Fan Timer Switch for Exhaust
Best for one-touch presets with repeat - 5
Check itENERLITES 4-Hour Neutral Countdown Timer Switch
Best for long runs up to 4 hours - 6
Check itLeviton Countdown Timer Switch for bathroom fan
Best for very short 2 to 15 minute runs - 7
Check itFosmon Countdown Light Timer Switch for Bathroom
Best for a 2-pack with many presets - 8
Check itTOPGREENER Countdown Timer Switch
Best for a 2-pack with 1 minute to 4 hours - 9
Check itLegrand Radiant Digital Countdown Timer Switch
Best for a rocker style with 10 to 60 minutes
The best bathroom fan timer switches for each setup
ENERLITES leads for short preset runs, BN-LINK leads for flexible twist timing, and Leviton leads for a no-neutral Decora option. The right pick depends on your wiring, your usual run time and whether you control a fan alone or with a light.
For another ventilation layout, compare inline duct fans. For a wall-mounted unit, compare wall-mounted bathroom exhaust fans.
ENERLITES Countdown Timer Switch for Bathroom Fans: Best for short post-shower runs
- 1, 5, 10, 15, 20 and 30 minute presets
- Neutral wire required
- UL Listed
- Manual override
- Blue LED night light indicator
Six short presets match how long most bathroom fans need to run after a shower, and the LED helps you find the switch in the dark.
Pros
- Preset times fit bathroom use
- Manual override
- Screwless wall plate included
Cons
- Neutral wire required
- Bright LED may not suit a bedroom
The ENERLITES suits bathrooms where 10 to 20 minutes is your usual post-shower run. Its six preset buttons cover 1, 5, 10, 15, 20 and 30 minutes, so you can match the time to the fan and the room size.
A blue LED night light stays on, which helps you find the switch in a dark bathroom. ENERLITES says that glow is bright, so it is not ideal for a bedroom.
It supports 800W incandescent and 800VA fluorescent loads, a 1/4 HP motor and 15A current. Those ratings cover most bathroom fans and lights, but confirm a larger motor against the 1/4 HP limit.
It requires a neutral wire, plus hot, ground and load wires. A screwless wall plate, screws, instructions and wire covers are included.
Trade-off: preset buttons are simple and fast, but you cannot choose 12 or 25 minutes. If you want exact timing, the BN-LINK twist model below gives more choice.
BN-LINK Bathroom Fan Timer Switch for Lights: Best for any time from 2 to 60 minutes
- Twist knob sets 2 to 60 minutes
- No neutral wire required
- ETL listed
- Interchangeable faceplates and knobs
- 20A resistive rating
A spring-wound twist knob gives flexible timing without presets, which suits people who want a precise run time.
Pros
- Any time from 2 to 60 minutes
- No neutral wire needed
- Faceplate and knob options included
Cons
- No digital readout of time left
- Mechanical dial is less precise than presets
The BN-LINK twist model suits people who dislike preset choices. You twist the knob to set any shut-off time from 2 to 60 minutes, then the spring-wound timer turns the load off.
It needs no neutral or ground wire, which makes it a strong choice for older wall boxes. It fits most single or multi-gang decorator and toggle plates.
White or metallic faceplates and white or black knobs are included, so you can match the switch to your plate style. A wall plate and screws are also included.
Ratings are 20A/2500W resistive, 8A/1000W tungsten, 5A/625W ballast and 1HP at 125VAC. That gives it more motor headroom than several preset models here.
Trade-off: a twist dial has no readout, so you must remember where you set it. It also lacks the instant preset feel of a button timer, though it is simple to use.
Leviton Countdown Timer Switch for bathroom fan: Best for 10 to 60 minute presets
- 10, 20, 30 and 60 minute presets
- No neutral required with Green Flex Sleeve
- Single pole, 15A
- 1/2HP / 9.8A fan or motor rating
- Interchangeable line and load wires
A shallow Decora timer with four longer presets and a wiring design that helps prevent line and load mistakes.
Pros
- Shallow body fits wall boxes
- No neutral required
- Line and load wires can be interchanged
Cons
- Shortest preset is 10 minutes
- Ground wire is required
The Leviton DT160 suits bathrooms where 10 minutes is the shortest run you want. Its four presets are 10, 20, 30 and 60 minutes, with a manual off button on the same Decora style face.
Leviton says the shallow design fits a wall box more easily than deeper timers. That matters in older homes with crowded boxes.
The Green Flex Sleeve connects to a ground wire when no neutral is available. If a neutral is present, you remove the sleeve and connect to neutral instead.
A ground wire is required either way.
Load ratings are 600W LED/CFL, 1800W incandescent or halogen, 1200VA for several low voltage and fluorescent types, and 1/2 HP/9.8A for a fan or motor. Current rating is 15A resistive.
Trade-off: the 10 minute minimum can waste energy for a quick 5 minute run. Leviton also warns not to use it if it is the only light source in the area.
BN-LINK Bathroom Fan Timer Switch for Exhaust: Best for one-touch presets with repeat
- 5, 10, 20, 30, 45 and 60 minute presets
- Neutral wire required
- Manual ON/OFF override
- Repeat function
- ETL listed, 15A
One-touch presets cover most fan run times, and manual override gives instant control when you do not want to wait.
Pros
- Six useful presets
- Manual override
- Wall plate included
Cons
- Neutral wire required
- Repeat timing needs care if you forget it is set
The BN-LINK preset model suits people who want one-touch timing with manual control. Its six presets are 5, 10, 20, 30, 45 and 60 minutes, and a manual ON/OFF button overrides an active countdown.
BN-LINK lists a repeat function that can run the countdown again each day. Use that with care, since a forgotten repeat setting will keep turning the load on and off.
It is ETL listed and rated 125V, 60Hz, 15A/1875W resistive and general purpose, 10A/1250W ballast and tungsten, and 1/2 HP. It works with incandescent, fluorescent and LED lights, bathroom exhaust fans and heaters.
If the fan motor needs repair, see bathroom exhaust fan motor replacements.
A neutral wire is required, along with hot and load wires for single-pole use. A wall plate and screws are included.
Trade-off: you get more presets than the Leviton 60 minute model, but you lose the no-neutral wiring option. The repeat feature is useful for some rooms and confusing for others.
ENERLITES 4-Hour Neutral Countdown Timer Switch: Best for long runs up to 4 hours
- 5 min to 4 hour presets
- Neutral wire required
- UL Listed
- Manual ON/OFF
- Screwless wall plate included
Longer presets suit attic fans, heaters and timed lighting as well as bathroom fans that need extended drying.
Pros
- 2 and 4 hour options
- Manual control
- UL Listed
Cons
- Neutral wire required
- Long presets can waste energy if chosen by habit
The ENERLITES 4-hour model suits loads that need more than an hour. Its presets are 5, 10, 30 and 60 minutes, plus 2 and 4 hours, so it covers both a shower and a long timed light.
Press a button to start the countdown, or use the manual button for normal ON/OFF control. ENERLITES describes two LED modes, one that flashes twice to confirm a setting and one that stays on during the delay.
Ratings are 120VAC, 60Hz, 1000W incandescent, 1200VA fluorescent and 1/2 HP motor. Operating temperature is 32°F to 131°F, with humidity up to 95% RH non-condensing.
It is UL Listed and requires a neutral wire. A screwless wall plate is included, and ENERLITES gives a 3-year warranty.
Trade-off: long presets are handy for heaters and attic fans, but a 4 hour bathroom fan run would waste energy. Choose this model for mixed loads, not for a fan you always run for 20 minutes.
Leviton Countdown Timer Switch for bathroom fan: Best for very short 2 to 15 minute runs
- 2, 5, 10 and 15 minute presets
- No neutral required with Green Flex Sleeve
- Single pole, 15A
- 1/2 HP / 9.8A fan or motor rating
- Shallow design
Short presets suit quick bathroom ventilation and small closet or pantry lights where a long run is not needed.
Pros
- 2 minute option for quick jobs
- No neutral required
- Shallow body fits wall boxes
Cons
- Maximum preset is only 15 minutes
- Ground wire is required
The Leviton DT115 suits small rooms and short jobs. Its presets are 2, 5, 10 and 15 minutes, which is ideal for a quick fan run or a pantry light.
It shares the Leviton design with the 60 minute model. The shallow body fits a wall box, the two black wires can be swapped between line and load, and the Green Flex Sleeve handles no-neutral wiring with a ground wire.
Ratings match its larger sibling: 600W LED/CFL, 1800W incandescent or halogen, 1200VA for several low voltage and fluorescent types, 1/2 HP/9.8A fan or motor, and 15A resistive.
Leviton says it is practical for pantries, closets and other small spaces, as well as bathroom fans. Color can be changed with DTKIT faceplates.
Trade-off: 15 minutes is the maximum, so this is not a pick for a large bathroom or a slow fan. For longer runs, choose the Leviton 60 minute model or a 30 minute ENERLITES preset.
Fosmon Countdown Light Timer Switch for Bathroom: Best for a 2-pack with many presets
- 9 presets from 5 minutes to 4 hours
- Neutral wire required
- Illuminated button and red LED indicator
- 15A, 1/2 HP capacity
- 2-pack, ETL Listed
Two switches with nine presets give you one timer for the bathroom and another for a second fan, heater or light.
Pros
- Two switches in one pack
- Wide preset range
- Illuminated controls for dark rooms
Cons
- Neutral wire required
- Only one single gang cover plate is included
The Fosmon 2-pack suits homes with two timers to install. Its nine presets cover 5, 10, 15, 20 and 30 minutes, plus 1, 2 and 4 hours, with an off option.
The button stays illuminated in light blue, and a red LED shows while a program runs. That helps in a dark bathroom, though the glow may bother light-sensitive sleepers if the switch is near a bed.
It is rated 15A and 1/2 HP, certified ETL Listed, and installed with a ground wire for protection. A neutral wire is required.
Fosmon includes two switches and one single gang cover plate. If you need two plates, plan to buy a second plate separately.
Trade-off: the wide range and 2-pack value are strong, but the included plate count is a limit. The preset list also skips very short 1 or 2 minute runs that some buyers want for a quick fan burst.
TOPGREENER Countdown Timer Switch: Best for a 2-pack with 1 minute to 4 hours
- 8 presets from 1 minute to 4 hours
- Neutral wire required
- UL-listed
- Blue LED per button
- 2-pack with wall plates included
A 2-pack with eight presets covers short fan runs and long timed lighting, with an LED at each button.
Pros
- Two switches included
- 1 minute preset
- Press same button to turn off early
Cons
- Neutral wire required
- Front dimensions are larger than some picks
The TOPGREENER 2-pack suits buyers who want many presets at a low per-switch cost. Its eight presets are 1, 5, 10, 30 and 45 minutes, plus 1, 2 and 4 hours.
Press the same button again to turn the load off early. A blue LED sits next to each button and lights when a time is selected, which helps you see the setting in the dark.
It is UL-listed, single-pole only, and rated 120VAC, 1200W incandescent, 600W LED and 1/2 HP motor. A neutral wire is required.
TOPGREENER gives a 3-year warranty.
Two switches, wall plates, wire nuts and instructions are included. The LED function can be customized, according to TOPGREENER.
Trade-off: the front is about 5 x 3 x 2.15 inches, larger than some picks here, so check your wall box depth and plate fit. It also needs a neutral wire, unlike the no-neutral Leviton and BN-LINK twist models.
Legrand Radiant Digital Countdown Timer Switch: Best for a rocker style with 10 to 60 minutes
- 10, 20, 40 and 60 minute presets
- Neutral wire required
- Digital visual indication
- Rocker wall switch
- Narrow back body
A rocker style timer with four presets suits buyers who prefer a paddle look over push buttons.
Pros
- Familiar rocker operation
- Narrow back body
- Visual indication of selected time
Cons
- Neutral wire required
- Motor rating is 1/6 HP, lower than several others
The Legrand Radiant suits buyers who want a rocker, not a row of buttons. It has four presets at 10, 20, 40 and 60 minutes, with visual indication of the selected time.
The narrow back body leaves more room for wires in the box, which helps in crowded installations. Side wire terminal screws accept #12 to #14 AWG solid wire, and push terminals accept #14 AWG solid copper only.
It is current rated 15A and motor rated 1/6 HP. That motor rating is lower than the 1/2 HP ratings on several other picks, so confirm your fan motor size first.
A neutral wire is required. The white rocker is part of the Pass & Seymour Radiant collection, and screwless wall plates are sold separately.
Trade-off: the rocker feel is familiar, but the preset gaps are wide. You cannot choose 5, 15 or 30 minutes, and the 1/6 HP motor limit narrows use with larger fans or heaters.
Compare bathroom fan timer switches side by side
The table below compares preset range, wiring need and motor rating, since those three facts decide most purchases. {{compare}}
How we compared these timer switches
We compared specs, features and buyer feedback against what a bathroom fan timer searcher wants. That means short presets, clear manual override, safe wiring and ratings that match a typical exhaust fan.
We checked neutral wire needs first, because that fact can stop an install. We then checked preset range, motor rating, lighting rating and what is included.
We did not test these switches by hand. We researched them and compared the documented specs.
Do you need a neutral wire for a timer fan switch?
Check your wall box first, since neutral wire is the most common reason a timer switch will not work. A neutral wire is a white wire in the box, and some electronic timers need it to power their controls.
Options with a neutral wire
ENERLITES, BN-LINK preset, Fosmon, TOPGREENER and Legrand models here need a neutral wire. They replace a standard single-pole switch when hot, neutral, ground and load wires are present.
No-neutral options
The BN-LINK twist model needs no neutral or ground wire. The two Leviton models use a Green Flex Sleeve on a ground wire when no neutral is available, and a ground wire is required.
When to call an electrician
Call an electrician if you are unsure which wire is line, load or neutral, or if the box has no ground wire for a Leviton model. Power off at the breaker before you open the box.
How long should a bathroom fan timer run?
Most bathrooms do well with 10 to 20 minutes after a shower, and 30 minutes helps a large or slow fan. Start with 15 minutes and adjust based on fogged mirrors, damp towels and odor.
Short runs: 1 to 10 minutes
Short presets suit small bathrooms, quick hand washing and pantry or closet lights. The ENERLITES 1 minute option and Leviton 2 minute option are useful for a fast burst.
Standard runs: 15 to 30 minutes
This range covers most showers. The ENERLITES 20 and 30 minute presets, and the BN-LINK 20 and 30 minute presets, fit this need well.
Long runs: 45 minutes to 4 hours
Long presets suit heaters, attic fans, garage lights and security lights. They are rarely needed for a bathroom fan, and a 4 hour setting can waste energy if left on by habit.
If you want a plain switch instead, our best bathroom exhaust fan switch guide covers manual options.
Can a timer switch control a fan and light together?
Yes, if the fan and light share one single-pole circuit and stay within the switch rating. Both loads will turn on and off together, which is simple but less flexible.
When combined control works well
Combined control suits a small bathroom where you always want the fan and light on together. It also suits a garage or laundry room where one switch already controls both loads.
When separate control is better
Separate control is better when you want light without fan noise, or fan time without light. For a switch that handles both loads with separate timing, see our best bathroom fan timer switch with light switch picks.
Load limits to check
Check the fan motor rating in HP or amps, and the light rating in watts. A 1/6 HP limit, like the Legrand model, is tighter than a 1/2 HP limit on several other picks.
For fan and light combo switches in general, our best bathroom fan light combo switch guide explains the trade-offs.
Countdown timer or smart timer: which fits a bathroom fan?
Choose a countdown timer for simple, reliable fan run time, and a smart timer for schedules or remote control. A countdown timer turns off after a set time and needs no app.
Countdown timers
Countdown timers are easy for guests and kids to use. Press a preset, and the fan shuts off on its own.
That is why most picks here are countdown models.
Smart timers
Smart timers add app control, voice control or schedules. They cost more and need Wi-Fi or a hub, and they can fail to respond if the connection drops.
Our best smart timer switch for bathroom fan guide covers that option.
Hybrid thinking
Some buyers want a timer for the fan and smart control for lights. That split setup gives each load the control it needs, but it needs two switches and more wall box space.
How do timer switches affect humidity and odor?
A timer helps a fan run long enough to remove steam and odor, then stops it so energy is not wasted. It does not add dehumidification on its own.
What a fan removes
A bathroom fan exhausts moist air outside. That lowers humidity in the room, which helps mirrors clear and towels dry faster.
Our guide on whether Do Bathroom Fans Dehumidify? explains the limits.
What a timer adds
A timer adds consistency. You set 15 or 20 minutes, leave the room, and the fan finishes the job.
Without a timer, the fan often stops as soon as you flip the switch off.
What a timer cannot do
A timer cannot make an undersized fan move more air, and it cannot pull moisture from a sealed room with no exhaust path. For whole-room moisture, a portable dehumidifier is a different tool, and our guide on whether Does a Dehumidifier Need an Exhaust? covers that question.
How do you install and care for a bathroom fan timer switch?
Power off at the breaker, confirm your wires, then follow the switch instructions for single-pole wiring. Most installs take under an hour for a confident DIY reader, but wiring mistakes can be dangerous.
Before you start
Check for line, load, neutral and ground wires as your chosen model requires. Confirm the wall box depth, since some timers are deeper than a standard switch.
The Leviton shallow design and Legrand narrow body help in tight boxes.
During install
Use wire nuts or terminals exactly as the instructions state. Keep the wall plate screws snug but not over-tightened, since overtightening can crack a plate or stress the switch body.
After install
Test each preset and the manual override. Check that the LED indicator works as described.
Clean the switch face with a dry cloth and avoid spraying liquid directly on the buttons.
Verdict: which bathroom fan timer switch should you buy?
Buy the ENERLITES Countdown Timer Switch if you want the best all-around presets for a bathroom fan. Its 1 to 30 minute range, manual override and LED indicator fit most post-shower needs.
Pick the BN-LINK twist model if you want any time from 2 to 60 minutes and no neutral wire. Pick the Leviton 60 minute model if you want presets with no-neutral wiring and a shallow Decora body.
Pick the Leviton 15 minute model for short runs, the ENERLITES 4-hour model for long loads, and a 2-pack from Fosmon or TOPGREENER if you are wiring two rooms. For a rocker style, consider the Legrand Radiant.
Next, check your wall box for a neutral wire, confirm your fan motor rating, then match the preset range to your usual shower time. That order will lead you to the right timer switch for a bathroom fan.
Our top 3 picks at a glance
-
1
Best for short post-shower runsENERLITES Countdown Timer Switch for Bathroom Fans
9.7/10 our score
See it on Amazon -
2
Best for any time from 2 to 60 minutesBN-LINK Bathroom Fan Timer Switch for Lights
9.6/10 our score
See it on Amazon -
3
Best for 10 to 60 minute presetsLeviton Countdown Timer Switch for bathroom fan
9.5/10 our score
See it on Amazon
Frequently asked questions
How long should a bathroom fan run after a shower?
Many households run the fan for 10 to 20 minutes after a shower. Start with 15 minutes and adjust based on mirror fog and damp towels.
A 20 or 30 minute preset gives slower drying fans more time to clear moisture.
Do I need a neutral wire for a bathroom fan timer switch?
Some models need a neutral wire and some do not. Check the wires in your wall box before you order.
If no neutral wire is present, choose a no-neutral model or have an electrician check whether one can be added safely.
Can one timer switch control a fan and a light together?
Yes, if both loads are on the same single-pole circuit and within the switch rating. That setup turns both off together, which some people like and others do not.
Separate controls give you more choice.
What is the difference between a countdown timer and a smart timer?
A countdown timer runs for a set time, then turns off. A smart timer adds app, voice or schedule control.
Choose countdown control for simple, reliable fan run time, and smart control when you want schedules or remote use.
About this guide: Our look at bathroom fan timer switches draws on maker specs, materials and what owners report. See how we research.



